View Full Version : 240 won't run with 99% new parts!
February 18th, 2012, 05:14 PM
So I have a 1990 ka24e 240 and it was running on 3 cylinders so I swapped the head and gaskets and now it has good compression in all cylinders but from the 6 hours I took to work on it, somehow it decided not to run anymore!!! It cranks but worn start, help? I've checked everything humanly possible.
February 18th, 2012, 06:53 PM
do u have fuel? do u have spark? is it on time.?
February 18th, 2012, 07:16 PM
Redone timing, have fuel pressure haven't checked individual injectors, and it has spark
February 18th, 2012, 07:22 PM
my mistake when i did mine was i acidently split a wire in the harness during my swap. And guess who came to the rescue to tell me that...................H22EKTurbo :-)
February 18th, 2012, 07:36 PM
make sure u have the injectors in correct order maybe thats it
February 18th, 2012, 07:53 PM
check your ground wires thats the most common problem
February 18th, 2012, 09:04 PM
Yeah I will check everything again. Thanks guys, il let you know how it goes tomorrow
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.